1/32 Fully Cowled Mini 4WD #45 Buster Sonic Premium (AR Chassis)

[Large diameter tires and AR chassis take you to a new realm of speed] This is a plastic model assembly kit of a high-performance racer that uses a shaft drive four-wheel drive. The Buster Sonic Premium is a premium version of the Buster Sonic, the fourth machine of one of the main characters of the Mini 4WD manga “Bakusou Kyodai Let’s & Go!!”, Hoshino Retsu. The Buster Sonic is characterized by its slim style, with the front and rear cowlings shortened and made smaller, and the front suspension unit reproduced. In addition, the large rear wing is unique in that the stays that rise from the rear cowling extend to the wing surface. The body color is white. A special metallic sticker tightens the form. The AR chassis is made of metallic gray ABS resin, while the underpanel and diffuser are made of red low-friction resin. The large yellow five-spoke wheels are fitted with slick tires. [AR Chassis] The AR chassis is not only aerodynamic, but also has all the elements necessary for Mini 4WD racing, such as ease of maintenance, rigidity, and expandability. Equipped with air intakes for the battery and motor, it efficiently cools the inside of the chassis with the wind while running, preventing power loss due to heat. In addition, it is equipped with plastic bearings made of low-friction resin, which reduces drive loss and achieves weight reduction. The underpanel and diffuser can be removed with one touch, allowing you to replace the battery and motor without removing the body. In addition, a rear skid bar is standard equipment. When passing through a slope course such as a slope section, the skid bar made of low-friction resin comes into contact with the course surface to control the machine’s posture and prevent it from going off the course. Comes with a 4.2:1 speed gear. [Basic specifications] ● Total length when completed 155mm ● Overall width 97mm ● Overall height 44mm ● Motor included ● Assembly is a snap-fit ​​type that does not require adhesive