[The evolved Magnum runs on the course!!] This is a plastic model assembly kit of a high-performance racer that
uses a shaft-driven four-wheel drive . The Great Magnum R (Revolver) is the machine of the protagonist, “Hoshiba Gou,” who plays an active role in the mini 4WD manga “Let’s & Go!! Return Racers!!” when he was a junior high school student. It features a form that gives a sense of powerful running , such as a low and wide body with sharp edges and a large rear wing that regulates the flow of air . In addition, the design, which has a stronger image of a pistol than previous machines, is also noteworthy. The body is made of white ABS resin. The flame graphics that appeal to passion in red and blue, markings, headlights, etc. are available as metallic stickers. The bonnet panel on the nose can be removed, and a trunk space is provided. You can enjoy setting the weight balance by storing mass damper weights with a diameter of 11.5 mm . [Adopts FM-A chassis with a front motor layout]　The chassis adopts the FM-A with a front motor layout that incorporates an aerodynamic design. Since the center of gravity is closer to the front of the body , it is possible to run with a sense of stability even on courses with many ups and downs . A low-friction resin skid bar is standard equipment on the lower front part, and the four rollers are also made of low-friction resin. The rear roller is an 8mm thick type that enhances stability. The motor can be easily replaced from the bottom of the chassis, allowing for quick setting changes. Various parts can be attached to the aero side stays, which were inspired by the cross-sectional shape of an airplane wing . The chassis body is made of ABS resin, while the A parts such as the underpanel and skid bar are made of black low-friction resin. The A-spoke wheels are a vivid fluorescent green and are fitted with small-diameter, low-height tires. Includes a 3.5:1 super-speed gear and motor. [Basic specifications]　● Length 156mm, width 97mm, height 42mm when completed　● Motor included　● Snap-on assembly requires no adhesive [Items to be purchased separately]　● 2 AA batteries [Mini 4WD] [Mini 4WD] 1/32 Fully Cowled Mini 4WD Series No. 53 Great Magnum R (Revolver) (FM-A Chassis) H-4950344064195

This is a premium version of Hurricane Sonic, the third car of Hoshina Retsu, another main character in “Bakusou Kyodai Let’s & Go!!”. The chassis is an aerodynamic and highly durable AR chassis. The chassis body is made of metallic gray ABS resin. A-parts such as the underpanel and diffuser are made of red low-friction resin. Low-profile tires with a diameter of 26 mm are mounted on yellow five-spoke wheels. The

red and green coloring is reproduced with special metal-like stickers.
A rear skid bar that controls posture is standard equipment,
and six rollers are low-friction type with a
3.5:1 super-speed gear.

[Metal-look stickers and colored chassis make it even more impressive] This premium version of the Ray Stinger, the machine of Hijikata Ray, who appears in the Mini 4WD manga “Bakusou Kyodai Let’s & Go!!”, uses the Super-II chassis. Its unique style is attractive, with a sharp front cowl called the Stinger cowl, with the front fenders extending sharply forward, ducts on the body sides, and a jet aero duct on the rear cowl. The stickers that tighten up the silver body are a special type with a metallic look that is closer to the image in the original manga.

[Basic Specifications] ●Length when completed: 150mm ●Width: 97mm ●Includes motor ●Snap-on assembly without adhesive

[Items to be purchased separately] ●2 AA batteries

The long-awaited carbon chassis has been added to the Super II chassis! The Vanguard Sonic Premium, which has been made stronger to achieve a higher level of performance,

is now available with a Super II chassis made of carbon fiber-blended nylon resin. The wheels are also reinforced and made of carbon fiber-blended nylon resin. The chassis and wheels are black, while the battery holder and rear stays are red, making this a premium model worthy of its name. The

stickers have a new metallic design that emphasizes the image of the original comic.
The tires have a tread pattern.
Comes standard with a 3.5:1 super-speed gear.
Comes with a motor.

The long-awaited carbon chassis has arrived for the Super II chassis! The “Victory Magnum” Premium, which has increased strength and achieved a higher level of running, is

the second favorite car of Gou Seiba, the main character of “Bakusou Kyodai!! Let’s & Go”, and is now available with metallic stickers finished with the image of the original comic. As befitting the name of Premium, the chassis of the Super II is made of carbon fiber-blended nylon resin for added strength. The tires are equipped with carved tread patterns, giving the feet a realistic feel. ■The chassis is black, the battery holder and gear cover are blue, and the wheels are white parts.
■Equipped with a 3.5:1 super-speed gear as standard.
■Comes with a motor.

The material of the hexagonal mount, which is useful when installing rollers at a high position or when equipping FRP plates in two stages, has been changed to lightweight aluminum. It
is also finished in a red anodized color.
There are screw grooves on both ends of the mount, making it easy to install and remove parts.

This plastic assembly kit features 4WD and large-diameter tires to enable exciting wheelie and two-wheel driving action. The motor is mounted at the center of the chassis and provides power to the front and rear wheels via a sidewinder gear setup. The body features flared fenders and is matched with 52mm diameter, 31mm wide tires for plenty of laughs while the racing livery is recreated with stickers. In addition, the model&39;s easy assembly does not require any cement.

Specifications

• Length: 142mm
• Width: 125mm
• Height: 98mm
• Motor Included

Separately Required Items